Tension servo device is by traditional passive wire feeding mode change initiative to send line. According to the requirements of users can choose to adjust the tension of the tension device is divided into two segments, by replacing the spring tension range can be from 1g-600g and comes with feedback tension stabilizing system, the stable tension balance can be automatically. The tension is not affected by the factors such as the speed of the winding, the cover, the pulley, etc. the tension is stable, and the adjustment is simple and convenient.
Preparation of servo tension device before power on:
The line of servo tension device in accordance with the line of our company to provide a schematic diagram
1, the balance of spin, tension spinning in the 0 place
2, wool ring to relax, the degree of tightness of wool loop according to the size of the use of tension and adjust,
Tension small wool ring to relax, tension large wool ring compression
607 the control system will automatically adjust the adjustment of the control system according to the diameter of the receiving / release shaft. Therefore, the displacement stroke can be shortened and the control of winding / unwinding is achieved
