Magnetic tension device use precautions and maintenance The working state of tension rod tension device shall not be higher than the red line position. In the process of working is allowed only by minor tension, not allowed by the major small. Zhang Lixu from major hours, must adjust the stop in the state, in order to avoid breakage. As in the adjustment of the developed tension fluctuation representation, first the tension adjusting rotary disc clockwise to the maximum tension, and then slowly returned to the required tension near the restructuring. Mechanical tension device in the device when the rotary handle is not too large force, will affect the firmness of the mosaic pieces. To prevent the fall, will damage the ceramic element and shell. Tension rod device must be aligned with a locking screw axis plane. Line with the use of the model mismatch when not reluctantly use. The damping wheel is prohibited in the join any grease. Do not open the back cover and adjust. The regular replacement of wool circle, lest jam nozzle. Passing line wheel abnormal sound or not timely replacement, because the bearing has worn. The damping wheel if rolling slip, please O ring, with alcohol cotton to wipe the damping wheel pull in this? To clear the enameled wire residue on the inside of the wax dirt. Keep the production site clean, long-term backlog of simple tension machine parts wear dust. The long-term non use or long-term use after the tension and instability, please stop in when the rotary handle from childhood to big, from big to?? repeated several times, can recover the initial state. If is the use of magnetic tension device with the cylinder, pressure shall not be less than 5 kg. For details please visit our official website: http://www.www.swlawyer.org.cn Source: http://www.www.swlawyer.org.cn (reproduced please specify the reproduced source)